Week of 3/21

This week I spent more time on my card file for my projector case. I added a raspberry pi mesh and after getting all of my dimensions for the projector, I modeled that into my file as well. During the week I picked up some soldering tasks and did not end up printing it. The first soldering task was a small board with some headers and connectors which I finished relatively quickly. After that I soldered the last capacitors to the board but did not realize that they had been soldered backwards.

I removed and flipped one of the capacitors but am struggling to remove all of the solder from the pad to be able to re solder the last capacitor.

After today I should have the last capacitor soldered and have started the second 3d print for my case. I also spent some time this week creating and editing xdf and bin files for a software called tuner-pro, which is just custom programming and timing for my cars engine. I did this before but using premade files, so I wanted to learn to make my own and save hundreds of dollars.

This is the file displayed in boot-mod, a graphical interface used for editing these